Roland EGX-360 Specifications

MODEL	EGX-360
Table Size	12”(X) x 9”(Y) [305 mm x 230 mm]
Acceptable Flat and Cylindrical Engraving Materials	Acrylics, aluminum, brass, stainless steel, and glass (*)
Acceptable Ring Engraving Materials	Brass, silver, gold, etc. (**)
Loadable Workpiece Weight (When Using the Motorized Vise Jaw)	9.4 lbs (4.3 kg), including the weight of jig
X, Y, and Z Operation Strokes	X, Y, and Z: 12 x 9.1 x 1.6 in. (305 x 230 x 40 mm)
Maximum Angle of Rotation	During engraving: ±360°
X-, Y-, Z-, and A-axis Drive System	Stepping motor
Operating Speed	X and Y axes: 0.004 to 2.4 in./sec (0.1 to 60 mm/sec.) Z axis: 0.004 to 1.2 in./sec (0.1 to 30 mm/sec.) A axis: 9 rpm
Mechanical Resolution	X and Y axes: 0.0001 in./step (0.0025 mm/step) Z axis: 0.00005 in./step (0.00125 mm/step) A axis: 0.045°
Spindle Motor	Brushless DC motor, maximum 50 W
Spindle Speed	5,000 to 20,000 rpm
Tool Chuck	Cutter holder, collet method
Loadable Workpiece Thickness (When Using the Flat Table)	Maximum 3.1 in. (80 mm), 3.0 in. (78 mm) when nose unit is used
Interface	USB (compliant with Universal Serial Bus Specification Revision 1.1) Serial (RS-232C-compliant)
Internal Memory	4 MB
Control Command Set	RML-1
Required Power-Supply	Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664‐1) Required power capacity: 1.9 A (100 to 120 V)/0.8 A (220 to 240 V)
Power Consumption	80 W
Operating Noise	During operation: 60 dB(A) or less (when not cutting), during standby: 40 dB(A) or less (as specified by ISO 7779)
External Dimensions	25.2" (W) x 26.6" (D) x 29.8" (H) [639mm (W) x 675mm (D) x 755mm (H)]
Weight	186 lb (84 kg)
Installation Environment	Operating environment: Temperature of 41 to 104°F (5 to 40°C), 35 to 80% relative humidity (no condensation) Ambient pollution degree: 3 (as specified by IEC 60664-1)
Included Items	Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), diamond scraper (diameter 4.36 mm), flat table, spare mounting screw (for the cutter holder), wrench, solid collet for diamond scraper (diameter 4.36 mm), solid collet (diameter 4.36 mm) , solid collet (diameter 3.175 mm), Cylindricalengraving adapter, cup cones, face plates, Standard jigs, Pen jigs, water nose attachment, face-plate mounting screws, standard-jig retaining screw, pin jigs, flat-table securing screw, hexagonal screwdriver, hexagonal wrench, handy panel, adhesive sheet, lubricant filter, vacuum adapter for chip cleaning, Dust tray, USB cable, Roland Software Package CD-ROM, Roland EngraveStudio CD-ROM, Roland EngraveStudio Software Guide, and EGX-360 Startup and Maintenance Guide.
Supported Operating Systems	Windows 2000/XP/VISTA (32 bit only)
Cutters or attachments available separately are required. *Jigs and cutters available separately are required.