CALL TODAY 1-866-342-0890M-S 9AM - 5PM (EST)
Cutting method
Media-movement method
Driving method
Digital control servo motor
Maximum cutting area
29 x 984-1/8" (737 x 24,998mm)
39 x 984-1/8" (1000 x 24,998mm)
47 x 984-1/8" (1195 x 24,998mm)
Acceptable media width
2 to 36" (50 to 915mm)
3-1/2 to 46" (90 to 1178mm)
3-1/2 to 54" (90 to 1372mm)
Maximum cutting speed
During cutting: 33ips (850mm/sec.) [in all directions] During tool-up: 47 ips (1202mm/sec) [in 45º direction]
Cutting force
20 to 350 gf
Mechanical resolution
0.00049"/step (0.0125mm/step)
Software resolution
0.00098"/step (0.025mm/step)
Distance accuracy
Error of less than ± 0.2% of distance traveled, or 0.00039 (0.1mm), whichever is greater
Repetition accuracy
0.1mm or less (excluding stretching/contraction of the material) Range for assured repetition accuracy For materials with a width exceeding 24" (610mm): Length 157-7/16" (4000mm) (GX-400/500 only) For materials with a width of 24" (610mm) or less: Length 314-15/16" (8000mm)
Serial (RS-232C compatible), USB (Rev. 1.1)
Buffer size
8MB (2MB for re-plot buffer)
Power supply
AC 100V to 240V +/- 10% 50/60Hz 1.2A
AC 100V to 240V =/- 10% 50/60Hz 1.1A
Power consumption
Approx. 95W
Approx. 100W
Acoustic noise level
Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779)
Dimensions with stand
45-1/16(W) x 28-5/8(D) x 43-13/16"(H) 1144(W) x 727(D) x 1113mm (H)
55-3/8(W) x 28-5/8(D) x 43-13/16"(H) 1407(W) x 727(D) x 1113mm(H)
63-1/16(W) x 28-5/8(D) x 43-13/16(H) 1602(W) x 727(D) x 1113mm (H)
Weight with stand
97lb. (44 kg)
112.4lb. (51 kg)
121.2 lb. (55 kg)
Operating temperature
41 to 104F (5 to 40C)
Operating humidity
35 to 80% (non-condensing)
Standard accessories
Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10/11/12 and Adobe Illustrator 9/10/CS), startup guide, user manual